Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Exhaust Manifolds
You're viewing 1 - 12 of 12 products in this category
ARP Exhaust Manifold bolt set
Set of 16 Stainless Steel Hex High tensile bolts and 16 ground washers. These are not affected by extreme temperatures as is found with mild steel items.
Result is that they can be successfuly removed without breaking off or seizing.
more >>
Range Rover Classic V8 Tubular 4-1 Exhaust Manifolds
Mild Steel Manifolds for Range Rover Classic V8. Have been successfuly fitted to other land rover vehicles with some minor modification.

Can be modified to suit Cobra (Not Pilgrim) and Specials
2 x 4-1 Set with gaskets & fittings to suit straight or flanged connectors.

Primaries 1 1/2" OD
S......
more >>
Edelbrock Chrome Exhaust Tips
Chrome Exhaust Tip with 2.5" Inlet
Priced per pair
more >>
Exhaust header/manifold wrap.
Moroso -Genuine Header/Manifold wrap 50 ft long, 2" wide and 1/16th thick. The wrap is used to reduce under bonnet engine tempertures and therefore allow the engine to draw cooler air = more power.
more >>
Cool It Exhaust Header Wrap
Improve Horsepower and reduce under bonnet temperatures by up to 70%.
Each roll is 2 inches wide X 50feet long -enough to wrap a set of V8 headers
more >>
Thermo Tec Heat Sheild
Self Adhesive Heat Sheild
24 x 12" Pad will withstand temps upto 2000 deg. F
Useful for protecting inner wings, bonnets etc etc
more >>
Edelbrock Chrome Exhaust Tips
Chrome Exhaust Tip with 2.25" Inlet
Priced per pair.
Also available individualy.
more >>
Competition Land Rover Discovery/Range Rover 4 - 2 - 1 Exhaust Manifolds
Tubular Steel 4 - 2 - 1 Exhaust Manifolds for larger capacity Land and Range Rover engines

3.9,4.0,4.2,4.6,4.8,5.0 Litres

2.5" Collector
1.75" Primary pipes
more >>
Land Rover Defender 90 & 110 Tubular Exhaust Manifolds
To Suit Land Rover 3.5,3.9 and larger capacity engines

Mild Steel
more >>
ARP Exhaust Manifold SS Bolts and SS Gasket Set
These Bolts made form Stainless Steel by ARP together withthese late type stainless gaskets are a more relaible way to help reduce exhust manifold leaks.

The stainless bolts retian their bright finish years after use and better stilll, since they dont corrode they are easy to remove when required......
more >>
Exhaust Manifold Bolt Tab Washers
STD Tab Washers (set 8)
more >>
MGR V8 Stainless Steel Tubular Manifolds
Full Set of Stainless Steel Tubular Exhaust Manifolds for MG RV8's ( Can also be fitted to MGB V8 Conversions but will require inner wings to be modified).

Much improved gas flow over the OEM Factory MGB V8 Manifolds and further enhanced by the superior stainless steel construction for corrosion......
more >>
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |