Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Bearings
You're viewing 1 - 13 of 13 products in this category
Rover Con-Rod Bearing 3.5,3.9,4.2 (GLYCO/Sealed Power)
STD or + 0.010

Federal Mogul or Sealed Power Quality Brand

To aid assembly and to prevent premature bearing surface scuff consider using Comp Cams Cam and Engine Assembly lube.
more >>
Rover Main Bearings 3.5,3.9,4.2 ( Quality Federal Mogul Brand)
Federal Mogul Main Bearing set.

Available in STD & 0.010" size for 3.5,3.9 & 4.2 litre RV8 Engines To suit Crank pin 2.3"
(+20 also available - please see seperate listing)

***Note***
Most 3.9 & 4.2 and some replacement 3.5 Litre Land Rover, Morgan & TVR Engines, have a thrust centre bearin......
more >>
4.0/4.6 Rover Con-Rod Bearing set (STD)
Federal Mogul Brand

Set of Rod Bearings to suit the 4.0/4.6 cross bolted block engines.

To aid assembly and to prevent premature bearing surface scuff consider using Comp Cams Cam and Engine Assembly lube.

Image is for display only
more >>
Rover Main Bearings STD for 4.0/4.6 Engines
Suitable for the 2.5" Crank Journal engine of 4.0/4.6 litres capacity

To aid assembly and to prevent premature bearing surface scuff consider using Comp Cams Cam and Engine Assembly lube.

Image is for display only
Brand supplied may vary according to stock
Clevite No Longer available/manufa......
more >>
Finished Cam Bearing Set (Rover 3.5/3.9/4.2)
Finished size and ready to install.
To suit 3.5,3.9,4.2,4.0, 4.6 and 5.0 litre Engines.

Fed Mogul Brand ( Good Quality )

To aid assembly and to prevent premature bearing surface scuff consider using Comp Cams Cam and Engine Assembly lube.
more >>
Rover Con rod bearings +10 4.0/4.6
Full Set of GLYCO Brand oversize (+10) Rod Bearings to suit 4.0/4.6 engines or others using the 2.5" main journal type crankshaft

To aid assembly and to prevent premature bearing surface scuff consider using Comp Cams Cam and Engine Assembly lube.
more >>
Rover Main Bearing set +10 4.0/4.6
Cross Bolted type large journal 2.5" Main Bearing Set. AE Brand (Federal Mogul)

To aid assembly and to prevent premature bearing surface scuff consider using Comp Cams Cam and Engine Assembly lube.
more >>
Rover 4.0/4.6 Main and Con Rod bearing Sets
Available in STD or undersize +0.010"
to suit large journal x-bolted engine
Complete set of Main Bearings
Complete set of connecting rod bearings

To aid assembly and to prevent premature bearing surface scuff consider using Comp Cams Cam and Engine Assembly lube.
more >>
Rover Main Bearings 3.5,3.9,4.2 (+20)
Oversize 3.5,3.9 or 4.2 litre Rv8 + 0.020 " Main Bearings.
King or AE Brand.

Image for display purposes only
(clevite not avaialble in these sizes)

To aid assembly and to prevent premature bearing surface scuff consider using Comp Cams Cam and Engine Assembly lube.
more >>
Rover Con-Rod Bearings 3.5,3.9,4.2 +0.020/0.030"
Oversize Rod Bearings to suit grinds of + 0.020"
or + 0.030" (largest possible)

To suit the 2.3 Main Journal Crankshaft or engines using a 2.00" rod journal pin

To aid assembly and to prevent premature bearing surface scuff consider using Comp Cams Cam and Engine Assembly lube.
more >>
Rover Race V8 SJ Rod Bearings Clevite H Series NASCAR
Rover V8 Race Clevite Triple Layer Extreme Duty
Rod Bearings available in STD, + 0.010" or + 0.020" undersize.

These are suitable for all SJ (small journal) engines, 3.5, 3.9, 4.2 and our 5.0 and 5.2 Litre Engines.

Price is per engine set.
more >>
Clevite Main Bearing Set
STD or + 0.010

Clevite Brand

Suitable for 3.5 litre engines (all)
3.9, 4.2 and TVR 5.0 Litre Engine will require extra Centre Plain Bearing 16.35

To aid assembly and to prevent premature bearing surface scuff consider using Comp Cams Cam and Engine Assembly lube.
more >>
Clevite Rod Bearings 3.5,3.9,4.2, 5.0
STD or + 0.010

Clevite Brand

Suitable for 3.5,3.9,4.2 and some 5.0 TVR Engines

To aid assembly and to prevent premature bearing surface scuff consider using Comp Cams Cam and Engine Assembly lube.
more >>
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |