Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Block Bolts
You're viewing 1 - 11 of 11 products in this category
Std main Cap Bolts
Set of 10 for all Rover 8 Engines. Always worth replacing these on a rebuild due to the stresses and rigours of engine operation.

Genuine LR Bolts not replacement
For added insurance consider the ARP Main Stud Kit.
more >>
Rover V8 ARP Main stud Kit
Superior clamping from these main stud kits. The kit features high tensile steel studs with nuts and washers as well as assembly lube.

Lube applied to the bolts allows consistant torque values when comparred to using other lubes or mixes.
Added insurance and a must for high performance V8's fi......
more >>
Con-Rod Bolt & Nut
STD Nut + Bolts for Rover V8 engines
3.5, 3.9, & 4.2 Litres
( Aftermarket )
more >>
Rover V8 3.5 3.9 4.2 ARP Con - Rod bolt set
190,000 PSI steel for added durability - a must for high performance and modified motors and only a few quid more than standards.

Includes bolts & nuts and installation lube. Pre -stretching these bolts is mandatory - if you dont have a suitable gauge then torque and release 3 times to give maxi......
more >>
4.0/4.6 x Bolts (Genuine Land Rover)
Hex Head x bolts (8)

Generally (8) per engine but some engines were fitted with 9 flanged hex bolts with one or two cap head screws on number 5 main cap.
more >>
4.0/4.6 x Bolts (Genuine Land Rover)
Socket Cap Head type (HT)
2 per engine
more >>
4.0/4.6 X bolt sealing dowty washers
Set of 10
9 large and 1 small for all x-bolt engines
4.0 - 4.6 Litres
more >>
4.0/4.6 Con Rod Bolts ( Genuine )
Recommend changing at rebuild.

Priced as a set but also available individualy
more >>
ARP Main Stud,Rod Bolt & Bearing Kit
A useful upgrade to consider when rebuilding your 3.5,3.9 or 4.2 litre RV8
You get -
ARP HD Rod Bolt/Nut Set
ARP Main Bearing Stud Kit inc. Washers/Nuts
Main Bearings in either STD or +10"
Rod Bearings in either STD or +10"

(Bearings are now Federal Mogul Brand)
more >>
Rover Cross Bolted - ARP Main Sud + Cross Bolts Kit
Rover V8 ARP Main stud Kit

Superior clamping from these main stud kits. The kit features high tensile steel studs with nuts and washers as well as assembly lube.

Lube applied to the bolts allows consistant torque values when comparred to using other lubes or mixes.

Added insurance and a......
more >>
ARP Cylinder Block Main Journal Cap Bolts
ARP High Quality Main Cap Bolts - replacement for the standard Rover Bolts.

These bolts are flanged so spread the loadign more evenly. A useful and inexpensive upgrade

Suits all Rover, TVR, Land Rover engines
1970 - 2002
3.5,3.9,4.2,4.3,4.5,4.6,4.8,5.0
more >>
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |