 |
 |
 |
|
 |
|
Rover V8 4.6 Short Engine |
|
|
Rover V8 4.6 Short Engine (reman)
New late type 4.6 Cylinder Block to suit ( Motronic/GEMS)
Reground or polished crankshaft, inspected and chemicaly cleaned.
Checked, inspected and cleaned connecting rods
New appropriae sixed bearings installed.
New Cylinder block mains Bolts, cross bolts and......
|
| more » |
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
ARP Cylinder Head Stud Kit ( 10 Bolt heads) |
|
|
ARP Cylinder Head Stud kit
To Suit late RV8 engines ie Cylinder Heads with 10 hole fixing
ARP Cylinder heads when fitted to New engines ie 4.0/4.6 have been found to reduce the frequency of cylinder block liner problems.
ARP Thread Lube Not Included but can be purchased seperately £8.95......
|
| more » |
|
|
|
|
|
|
|
|
|
|
 |
|
Rover V8 Super Lightweight Steel Flywheel ( 6.85kg approx.) |
|
|
Rover V8 Steel Billet Lightweight Flywheel.
So does a light flywheel make any difference ?
In first gear 1kg removed from the flywheel equates to approx 40 kg removed from the chassis !
This wont have the same effect as higher gears are selected but if you require better aceleration in th......
|
| more » |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
Rover V8 3.9 EFi Cam, Lifters & Steel timing Set |
|
|
Rover 3.9/4.2 Efi Camshaft
Steel Heavy Duty Timing Set
Set of OE Land Rover Followers/Lifters
Supplied with cam bolt & cam lube
This combination will yeild an additional 5-8BHP over the standard 3.5 carb camshaft due to the revisions.
For further improvements in power and reliability ie mo......
|
| more » |
|
|
|
|
|
|
|
|
|
|
 |
|
Stage2/3 Performance Valve,Guide and seal Kit |
|
|
8 off 1.63" Inlet Valves - Tuftrided Stainless Steel (21-4N) +Waisted stem
8 off 1.4" Exhaust Valves - Tuftrided S/S (21-4N) with waisted stems
8 Bulleted shortened In Valve Guides
8 Bulleted Shortened Ex Valve Guides
16 Neoprene Valve stem seals
|
| more » |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
Value ****Rover V8 Edelbrock Carb Kit*** Quality Only £799.00 ! |
|
|
The Kit is suitable for Rover V8 engines only. ( See Note ont lower part of this page) With associated tuning parts such as Crower 50232 camshaft and Rhoads Hi-Rev lifters over 220 BHP is possible on a Rover 3.5 V8 engine.
Adding a more radical cam + modiifed cylinder heads will add more power. ......
|
| more » |
|
|
|
|
|
|
|
|
|
|
 |
|
Rover V8 and other Small Block V8's Edelbrock 500cfm carb. man.choke |
|
|
NEW (NOT Remanufatured) Carburettor to suit small block Rover V8 engines. Works particularly well on modified Rover V8's from 3.5 and over.
The Edelbrock 500 carb gives excellent throtle response,performance and in some cases fuel consumption benefits have also been gained.
Easy to install a......
|
| more » |
|
|
|
|
|
|
|
|
|
|
 |
|
Rover V8 SD1 > Oil pump gear/shaft |
|
|
Oil Pump Gear Set for SD1 V8 Engine 1976 >
The Rover V8 Engine has an inherently poor lubrication system especialy if used at higher rpm.
To help maintain oil pressure repace worn or chipped gears with new items when rebuilding.
Can not be used with early P5B/P6 Timing cover
(OE Parts)
|
| more » |
|
|
|
|
|
|
|
|
|
|
 |
|
Rubber Rocker Cover Gaskets |
|
|
Better sealing and re-usable -illiminate those orrible rocker cover oil leaks once and for all !
To Suit all Rover V8 Engines
Rover P5b, P6, SD1
MGB V8 MGRV8
TVR 3.5 - 5.0
Land Rover 3.5,3.9,4.0
Range Rover 3.5,3.9,4.0,4.2 & 4.6
|
| more » |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
