Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Flywheel/Clutch

Rover V8 Steel Billet Flywheel

Steel Billet Flywheel drilled to accept 9.5,10.4 & 10.5" Diameter Clutch Assemblies. These are premium grade SFI spec units and are complete with ring gear.

If using a 9.5" diameter clutch (STD 2WD) clutch locating dowels should be used. The dowels are not included and suitable holes drilled into the flywheel will be required to accept.

10.5 & 10.4" Clutches use Speciall Shouldered 3/8" UNC Bolts which do not require dowels.

9.5" Clutch uses 5/16" UNC Bolts and not UNF as per the stanadrd Rover V8 2WD flywheel

enlarge picture
£339.95
All prices include VAT @ 20%
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |