Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Camshafts

Pro 234 Rover V8

Semi Race/Race Rally Hydraulic

Ideal for most applications where smooth power delivery is required. Gives lumpy tickover and not suitable for automatic tranmission instalations.

The 234 grind offers strong midrange with the emphasis on top end power & torque

Loopy idle - 1200 rpm
Power from 2000 - 6000rpm
Redline 6500rpm +

INTAKE: Duration: 284 Lift: .512
Clearance Hot: .000
EXHAUST: Duration: 290 Lift: .526
Clearance Hot: .000

The specifications listed above are based on a rockerarm ratio of 1.60 IN 1.60 EX

LOBE SEPERATION 112
Duration at .050"
Intake: 228
Exhaust: 234

This cam will require further engine mods to maximise performance. Always check clearances when assembling.

Machine valve guide tops to give sufficient retainer to guide clearance or fit our shortened bullet guide sets.

Recommended components

Use with uprated lifters for best performance and always check lifter preload setting 0.020 -0.60".
Minimum 9.75:1 CR
Modified Cylinder Heads
Comp Double Vave Springs & Retainers

Can be used on engines equiped with cam retaining plate if discarded or machine the cam nose to accept cam retaining plate.
Alternatively install Teflon Thrust Bolt Kit

enlarge picture
£229.99
All prices include VAT @ 20%
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |