Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Stroker Crank Kits

Powerhouse - 5.0 Litre Stroker Kit !-318 BHP/295 Ft/Lbs Torque

Limited Number left and that it.

5.0 Litre Stroker Crank Kit

86.36mm SG iron Cranshaft 2.5" Main Journals, Heat Treated and indexed

Forged 6.00" "I" Beam Con Rods 0.927" floating pins

Ductile Chrome Moly Race Piston Ring Set

Fed Mogul Main Bearing Set

Clevite Competition Special Con Rod Bearing Set
96mm Forged Piston Set -

Approx. 10.5:1CR with 35cc heads or nearer 11:1CR with later 10 bolt 28c heads.

Suitable for Large Journal Cross Bolted Blocks Only. Will require Flanged Linerd Block

Fitting will require boring the block to 96mm
and may minor work to clearance the sump/crank on crank rotation.

With modified heads, suitable igntion & induction over 318 BHP and Torque output of over 300 ft/LBs. with a relativly mild camshaft in a 4 x 4 application.

With stage 4 cylinder heads and a wilder cam the above power outputs will be much increased.

A full engine balance will be required and the kits are made in small batches so to avoid dissapointment enquire early if you plan to upgrade soon.

£2,195.00
All prices include VAT @ 20%
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |