Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Flywheel/Clutch

Hydraulic Throw Out Bearing Assembly

Hydraulic Throw out Bearing Assembly. These units are used where gearbox bearing retainers to clutch pressure plate has limited space.

The unit is supplied with braided stainless steel pipes with swivel adaptors to allow scope for placing the feed and the bleed side of the assembly in a convenient position.

Approx dims are 42mm depth/height, flat face bearing, with full stroke of 0.800"/20mm

Most clutch assemblies require 0.500" so there is sufficent to operate most clutch assemblies.

Benifits of the HTO Bearing Assembly are linear movement o clutch pedal in realtion to clutch mechanism, less moving components, and a lighter clutch pedal.

Other items required are screw adjuster which allows the correct bearing float when installed.

Image is not representative of unit supplied. For further information please call or email

enlarge picture
£339.86
All prices include VAT @ 20%
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |