Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Cylinder Heads

New: 4.6 Litre 28cc 10 Bolt Cylinder Heads

Brand New 4.6 Cylinder Heads 10 bolt design suitable for all Rover V8 Engines. Although these are a direct repalcement for the later 3.9 and 4.0/4.6 litre engines they can also be used on earlier 3.5, 3.9 and 4.2 litre engines to raise compression ratio.

3.5,3.9 & 4.2 Cylinders Heads ( 14 Bolt ) are typicaly 35-37cc Chambers. The 10 bolt heads are a nominal 28cc which will raise compression and as a consequence BHP.

These heads are supplied BARE and therefore require valves, valve springs and retainers collets.

You may wish to consider fitting standard valves and springs ( see our valve and spring packages) or upgrading to the Big Valves please also see valve, guide and seals for this conversion.

Heads are per pair and are outright sale with no exhange surcharge.

enlarge picture
£1,290.00
All prices include VAT @ 20%
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |