Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Short Engines

4.8 Litre Flanged Linered Conversion + Forged Pistons & Ring Set*

Perfect upgrade or to repair and give some new life and performance to your tired or worn 4.6 litre engine.

Offer is for an exchange block bored to accept flanged liners and bored to accept 96mm Forged Pistons.

We machine and finish your block to accept new high quality flanged liners. Block will be bored and honed to accept our 96mm forged custom made pistons.

This allows you or your engine builder to re-use your 4.6 crankshaft and conrods to increase capacity and performance.

Compression ratio approx 9.75:1.

Similar conversion using a 4.0 litre block and rods will increase capacity to approx 4.15 and reduce CR to between 9.00 - 9.25:1.

The smaller capacity engine is however very responsive having the 71mm stroke and 96mm bore this resulting in a very responsive engine.

No exchange Surcharge £350.00

enlarge picture
£2,247.49
All prices include VAT @ 20%
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |