Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Valves/Timing

Rocker Pedestal Shim Kit (lifter preload)

Shims are used to adjust the litfter/tappet preload when fitting a new performance camshaft. If you are replacing with a standard camshaft and have had the cylinder heads machined then a shim kit may also be required. The shims fit under the rocker pedestal and allow the preload to be set correctly.

Failure to undertake this procedure may result in incorrect emissions and MOT/SVA failure.

enlarge picture
£31.59 (set of 24)
All prices include VAT @ 20%
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |